Eminence Beta-10cx 10 Coaxial Driver For Mac

eminence beta-12cx 12 coaxial driver, eminence beta-10cx 10 coaxial driver, eminence beta-8cx 8 coaxial driver, eminence beta 12cx coaxial driver

So, I decided to lower the corner down to 3 kHz I used spice to model the circuit based on the measurement.. These woofers have a threaded pole-piece so that a screw-on, 1” exit high frequency driver can be attached to form a coaxial set up.. I think my project cab sounds better It definitely has more low-end, which I like.. Some people prefer to remove the 3-dB pad, but I spent some time measuring the crossover point, and found it to be too high to start with (4 kHz). Click

Eminence offers coaxial woofers in 8, 10, and 12, called the Beta-8CX, Beta-10CX and Beta-12CX, respectively.. For a 10' woofer, I would prefer to cross at 1,500Hz but I'm asking a bit much Realistically, I'll be.. Eminence Beta-10cx 10 Coaxial Driver For Macbook ProThe highs were not as good as the ZLX-12 until I modified the stock crossover. Click

There are other posts about the lack of highs in the stock Eminence crossover, so it seems to be a common observation.. Also works well in a vented enclosure The Osprey is an Eminence Beta 10CX Coaxial in a 52 Liters Bass Reflex.. I started with an empty single 12' cab from SEISMIC audio (Luke 1x12C) I loaded it with the BETA-12cx and the ASD:1001 horn. 3

The low-end was a little hot, so that was easy to fix (This is a closed-back cabinet.. The highs are also smoother The EV can sound a little harsh Free Shipping Across Canada* - Recommended for Professional audio vocal wedges, or mid-bass in a sealed enclosure.. Cab $150 BETA-12cx $75 ADS1001 $30 Crossover $45 3 3uF cap $1 50 Great price for a nice FRFR system! I did the last bit of EQ tweeking with the output GEQ of the AXE.. ) It sounds great tilted back a bit, and has good dispersion Click to expand I should correct my original post. e828bfe731 4

My EV cab is the ZLX-12 (passive) I always get confused about the 'P ' 'P' is for 'powered' not 'passive'.. (I had to make an educated guess at the inductor values since I'm too lazy to pull them out and measure them.. ) I tried several capacitor values in the high-pass section until I settled on an additional 3. https://www.pixnet.net/pcard/64537602fa5fd1ee01/article/9b5393a0-838e-11eb-b3f3-fd3b1e70a06a